Details
Configurable
Configurable Product
Beyond combinations. Configure your drive individually.
X

Encoder ENX 10 MAG INT, 1-256 counts per turn | integrated in the motor

Encoder ENX 10 MAG INT, 1-256 counts per turn

For more information, please contact our sales support with the request form. Thank you

*Configurable products must be configured before ordering.
Prices may vary.

Sensors can be purchased only as a component of a combination.

Specifications

General information
Counts per turn 1
Number of channels 3
Line Driver No
Max. length of encoder housing 0 mm
Max. electrical speed 100000 rpm
Max. mechanical speed 100000 rpm
Technical Data
Supply voltage Vcc 6 V
Output signal CMOS
Output signal INC + COMM
Output current per channel -4...4 mA
Signal rise time 10 ns
Measurement condition for signal rise time CL=25pF, RL=1kOhm
Signal fall time 10 ns
Measurement condition for signal fall time CL=25pF, RL=1kOhm
Direction of rotation A before B CW
Index position A low and B low
Index synchronized to AB Yes
Typical current draw at standstill 13 mA
Max. moment of inertia of code wheel 0.0017 gcm²
Operating temperature -40...+100 °C

Description

The MAG encoder is a compact 3-channel encoder with a magnetic operating principle that is suitable for a wide variety of positioning and speed control applications. A resolution of up to 256 counts per turn can be programmed at the factory. The ENX 10 MAG INT encoder is integrated into the motor without increasing the length, the motor lines are routed using the common flexprint cable.

Downloads

Videos